Excavator BucketsExcavator Buckets

An excavator bucket is a typical attachment that connects to the end of an arm and digs, rips, cuts or sifts materials in different construction stages.

During earthmoving and demolition works, the use of excavator buckets is very important because they can be used in different ways due to an appropriate type or design.

This article will analyse the various kinds of excavator buckets, what they are used for, the advantages of using them and their importance in construction stages.

The Types of Excavator Buckets

Various excavator buckets are designed for specific uses and environments, with each having its features and specifications.

Some of the common types of are:

Digging Bucket

This is the most general and flexible type of bucket that can be used for excavation purposes as well as in moving materials for typical construction or landscaping requirements. It features teeth at the edge of its bucket for shattering and moving hard materials; these may include soil, rock or concrete.
Rock Bucket

This is a specialised bucket that helps in the penetration and fragmentation of solid surfaces such as asphalt, stone or even large sheets of rock. Its structure is reinforced and has sharp teeth, which can withstand high pressure and impact.

Utility Bucket

This is an attachment known as a trenching bucket, which allows excavation near the pipes and cables without causing any damage. It has a rounded edge and back side that is double-reinforced, ensuring safe and smooth digging capabilities while at the same time moving materials.

Grading Bucket

This is a levelling or slope-forming bucket and hole backfilling. It features a broad, flat and level edge that helps it spread any lying materials uniformly with minimum errors.
Tilt Ditch Cleaning Bucket

This is a ditch, drain and canal cleaning bucket. Its tilting mechanism allows it to change the angle of the bucket, while a curved edge facilitates easy scooping and dumping.
V Bucket

This is a V-ditching bucket that helps in creating the foundations of pipes, cables or drainage systems by digging trenches shaped like the letter v. It features a V-shaped edge, which is narrow and enables it to make trenches that are both deep and precise.
Frost Bucket

This is an attachment that helps in digging frozen or hard ground, e.g., permafrost or clay. It is equipped with a tapered end and has heavy-duty construction, enabling it to cut through even the toughest materials.
Micro Trenching Bucket

This is a bracket used for making narrow and shallow trenches in which fibre optic cables or other utilities may be installed. It has a thin, sharp edge and is built compactly to enable it to dig trenches accurately and quickly.
Skeleton Bucket

This is a sifting bucket used to separate rocks, concrete or bricks from finer materials such as soil or sand. It features openings between the bars of its bucket, which ensures that small materials sieve through while large ones are held.
Rake Riddle Bucket

This is a rake bucket, which helps in clearing up the ground of materials such as vegetation, roots or debris. It is equipped with a bucket edge that has tines or spikes; this enables it to comb and gather the materials as the soil passes through.
Clean-up Bucket

This is a cleaning and clearing-up site type of bucket and a classifying bucket that can be used for shifting bulk volumes of solid soft materials such as dirt, sand or mud. It does not have teeth on the bucket rim and has a wide capacity, which enables it to scoop materials effectively as well as dump them.
Overview

These are some of the different types that can be found in the market and which can also serve a number of purposes or projects.

All these types of buckets have their pros and cons depending on the use or environment in which they are going to be used.
The Uses and Benefits of Excavator Buckets

The various uses and advantages of them over other means used to lift or move materials, such as hooks, chains, slings or clamps, are discussed below. Some of the main uses and benefits are:
Digging and Excavating

Since they can dig and remove several forms of soil, rock, concrete or asphalt at varying degrees of complexity and depth, they can also make various excavations in the form of pits, grooves or trenches for different purposes, which include laying down foundations, installing utilities and building drainage systems.
Ripping and Breaking

Excavator buckets are capable of tearing and destroying solid and dense bodies like stone, rock, or concrete that prove difficult to penetrate or remove. They can also pull free and destroy ground-attached or embedded materials like roots, vegetation, and debris, among others.
Cutting and Pruning

Materials that are overgrown or unwanted, such as trees, branches or even weeds, can be cut and pruned by excavator buckets. They are also capable of cutting and pruning materials that hinder or interfere with the work site, like fences, wires, and pipes.
Sifting and Sorting

They allow you to sieve through and separate impure or mixed materials, for instance, rocks, concrete or bricks, from finer ones such as soil or sand. They can also sieve and separate valuable or reusable materials like metal, plastic or glass from garbage.
Moving and Loading

The buckets are portable materials that can be used to pick up and load them from one location of the site to another for instance, picking it on the ground into a truck or even vice versa. They can also handle the transfer and lifting of heavy, bulky or unwieldy materials like steel beams, iron bars or pipes.
Spreading and Levelling

The buckets can also be used to spread the materials that are non-uniform or do not have even a surface like earth, sand, gravel, etc. They are also able to distribute and level out the materials that will be required on-site, such as concrete asphalt or even soil.
Cleaning and Clearing

The buckets can be used to clean up materials that are messy or dirty, such as mud, dust and water. They are able to clean and remove dangerous or harmful substances like chemicals, oil, and gas. They are able to do a lot of things and operations that can enhance the work by its safety, efficiency, and quality.
How Excavator Buckets Are Used in Stages of Construction

They are very important in the construction stages since they can help and support the different procedures or activities that form part of a project under construction.

Some of the construction phases where they are priceless:

Site Preparation

This is the clearing, grading and staking phase when land is made ready for construction. In this stage, the excavator buckets can assist by digging, ripping, cutting, sifting, moving or cleaning off a wide range of materials on-site, including soil rock vegetation debris or waste.

Foundation

This is the stage where concrete or any other materials are dug, poured, and placed to form a foundation for the structure. A skid steer loader’s buckets can assist in this stage by digging the holes, trenches or ditches as per requirements for the foundation and also moving and loading the concrete or other materials to their desired location.

Structure

It is the stage where assembly, installation and connection of parts; steel or wood are used to form a structure from which brick may be made.
SUMMARY

When you look at how versatile these excavator buckets are, you begin to wonder what this kind of work was like before them; in fact, it doesn’t bear thinking about. Their roles on big and small industrial sites must be considered. If you are the company taking on the project, speak to the best to get the best!

Excavator Buckets